The Instruction of Projector Lamp Replacement

Projectors in the board rooms and also auditorium will help you to express the new ideas, explain the issues and also make sales. Projectors will also be found in the home theater. Projector bulbs are rather expensive, but with the right handling and also maintenance of the projector, lamp life is normally 2,000 to 3,000 hours. Here is information for you to make your projector bulbs last longer.

For the first step, you have to turn your projector off. Please wait for a full minute. After that, unplug your projector. Let it gets cool for at leas one hour before it is getting started with the lamp replacement. You can place the towel on the flat surface. Then, flip your projector over, placing its top quietly on the towel.

For the second step, loosen the lamp cover screw with the screwdriver. Doing the screw can be loosened, but it will not removed. You can remove the cover of the lamp. Then, loosen the two lamp module screws. They will be loosened, but not removed.

For the next step, you can remove an old lamp module by pulling on the handle or the grip. After that, insert the new lamp module. It will easily slide into the socket. You need to tighten the two lamp module screws.

For the last step, you should screws. Then, reattach the cover of the lamp and tighten its screw. Flip your projector over. Plug it into the surge protector plugged into the working electrical outlet. In doing this, you need to make sure that your projector is well ventilated. Turn on your projector and then use it's the menu in order to reset the lamp hour counter to zero.

Source : Ezinearticles